Skymaster Forum  

Go Back   Skymaster Forum > Search Forums
Register FAQ Members List Calendar Search Today's Posts Mark Forums Read

Showing results 1 to 25 of 186
Search took 0.06 seconds.
Search: Posts Made By: Jhogan0101
Forum: Messages 03-20-24, 02:57 PM
Replies: 10
Views: 2,016
Posted By Jhogan0101
After retorquing the cylinder base nuts it looks...

After retorquing the cylinder base nuts it looks like both the 1 and 3 cylinder have a small crack behind where the CHT probe is.
The leak on 3 is worse, drips once every 3 secs or so.
I will remove...
Forum: Messages 03-16-24, 06:52 AM
Replies: 1
Views: 281
Posted By Jhogan0101
Gear up crash washington

I saw this today. Looks like nose gear was extended and mains were retracted.

https://www.kiro7.com/news/local/small-plane-makes-emergency-landing-paine-field/YAGJDVGWZJBZDBMIKTBULNBU2M
Forum: Messages 03-14-24, 06:48 PM
Replies: 10
Views: 2,016
Posted By Jhogan0101
I removed the baffles today and good news looks...

I removed the baffles today and good news looks like cylinder is not cracked.
Looks like the leaking is coming from the base of #3 and #1 cylinders.
Lots of wiggling when running.
Forum: Messages 03-13-24, 09:18 PM
Replies: 10
Views: 2,016
Posted By Jhogan0101
Well after jamming many towels in many places and...

Well after jamming many towels in many places and running up/checking the towels.
It seems that the leak is on pilot side between cylinder 1 and 3.
When flight air blows down it makes a real mess...
Forum: Messages 03-07-24, 10:54 AM
Replies: 7
Views: 1,495
Posted By Jhogan0101
I know that plane! Looks great! My Skymaster...

I know that plane! Looks great!


My Skymaster wall
https://ibb.co/LxPTwQw
Forum: Messages 03-07-24, 10:17 AM
Replies: 6
Views: 443
Posted By Jhogan0101
Also check the connections going into the...

Also check the connections going into the hydraulic pump. They tend to get loose.
Forum: Messages 02-22-24, 06:02 PM
Replies: 10
Views: 2,016
Posted By Jhogan0101
Rear engine oil leaks

Im having a hard time locating source of rear engine oil leaks.
After flight seeing a good amount of oil on the pilot side rear cowl under the tail cap.
Inside looks wet on the upper exhaust tree,...
Forum: Messages 02-14-24, 06:43 PM
Replies: 4
Views: 1,361
Posted By Jhogan0101
You are correct sir…. Unfortunately…

You are correct sir…. Unfortunately…
Forum: Messages 02-14-24, 12:40 PM
Replies: 4
Views: 1,361
Posted By Jhogan0101
Replace or Don’t (Fuel Tank Problem)

I noticed when filling up pilot side main tanks ALL the way i get a small fuel leak.
Upon inspection with a boroscope, i think the leaking is coming from the small section of hose ON TOP FRONT (not...
Forum: Messages 02-01-24, 06:46 AM
Replies: 10
Views: 3,026
Posted By Jhogan0101
No, was in place.

No, was in place.
Forum: Messages 01-31-24, 10:07 PM
Replies: 10
Views: 3,026
Posted By Jhogan0101
A “buddy” of mine flew about 20 hours in 2 months...

A “buddy” of mine flew about 20 hours in 2 months while he was waiting for a new front spinner.
Nothing different or bad happened.
Forum: Messages 12-25-23, 11:36 AM
Replies: 15
Views: 15,814
Posted By Jhogan0101
My cowl flaps were replaced with the mechanical...

My cowl flaps were replaced with the mechanical kind.
They work “ok”.
They tend to not lock 100% and sometimes pop open

The cies senders have been amazing and worth the money in my opinion.
I...
Forum: Messages 12-18-23, 09:10 PM
Replies: 10
Views: 25,209
Posted By Jhogan0101
I also took apart my old sealed concorde that was...

I also took apart my old sealed concorde that was not working great anymore a couple months ago.
The water in the battery was low, it evaporated out.i ended up buying a new lead acid gill
because...
Forum: Messages 10-13-23, 08:59 PM
Replies: 5
Views: 8,747
Posted By Jhogan0101
Its owen bells (aviation enterprises) STC. Don...

Its owen bells (aviation enterprises) STC.

Don Nieser may still have parts for it as he provided owen with the parts to make his stc kit.

I have the manual cowl flaps and its a bitch to keep them...
Forum: Messages 04-18-23, 06:18 PM
Replies: 4
Views: 11,242
Posted By Jhogan0101
Recommendation for prop shop reseal threaded prop

Anyone know a shop that will reseal these?
Forum: Messages 02-24-23, 06:32 AM
Replies: 5
Views: 5,055
Posted By Jhogan0101
Saddle works great, tends to chip your paint....

Saddle works great, tends to chip your paint.
Its good to wrap some painters tape or the like first to protect fyi.
Forum: Messages 02-22-23, 03:13 PM
Replies: 17
Views: 8,668
Posted By Jhogan0101
Woodward Prop Governor 210443D

Woodward Prop Governor 210443D
Forum: Messages 02-22-23, 08:29 AM
Replies: 17
Views: 8,668
Posted By Jhogan0101
You could always swap front/rear governors, same...

You could always swap front/rear governors, same part number.
Heres the gaskets youd need TEMPEST® AA9144 FAA-PMA Prop Governor Gasket
Forum: Messages 02-21-23, 08:17 PM
Replies: 17
Views: 8,668
Posted By Jhogan0101
Tim, i also fly a 337B! SN 661! I know you just...

Tim, i also fly a 337B! SN 661!
I know you just spent a bunch of money but i would invest in an engine monitor.
I have a jpi edm 790.
I would not fly without it.
Its really helped me manage my flying...
Forum: Messages 02-08-23, 07:07 PM
Replies: 3
Views: 3,318
Posted By Jhogan0101
Reasons for Gross Weight increases?

I was looking at gw for different 337 models.
Anyone know what the reason(s) for gw increases are?

Chart attached

https://postimg.cc/4m86nDV5
Forum: Messages 01-15-23, 08:45 PM
Replies: 5
Views: 11,710
Posted By Jhogan0101
Thanks Herb, i started seeing on the rear and the...

Thanks Herb, i started seeing on the rear and the front.
Its seems to be concentrated on the blade root.
Forum: Messages 01-15-23, 04:09 PM
Replies: 5
Views: 11,710
Posted By Jhogan0101
Oil on prop?

Im seeing oil on my props. (Not red)
Its not a huge amount.

They were both removed a year ago and the inside “sludge” cleaned out, inner large o ring replaced, props reinstalled.

The oil is engine...
Forum: Messages 01-15-23, 12:25 PM
Replies: 4
Views: 2,997
Posted By Jhogan0101
https://www.yardstore.com/air-capital-screw-extrac...

https://www.yardstore.com/air-capital-screw-extractor-screw-knocker-old-man-combo

https://www.yardstore.com/phillips-2-acr-removal-bit

https://www.yardstore.com/lima-drill-kit-new
Forum: Messages 01-14-23, 04:21 PM
Replies: 4
Views: 2,997
Posted By Jhogan0101
Good resource for getting out old screws

This site has a lot of great tools to get those old wing panel screws out.
I was successful with air drill/screw knocker/acr bit combo.



https://www.yardstore.com/
Forum: Messages 12-31-22, 06:02 PM
Replies: 9
Views: 7,544
Posted By Jhogan0101
Happy with my a20/lemo

Happy with my a20/lemo
Showing results 1 to 25 of 186

 
Forum Jump

All times are GMT -4. The time now is 02:20 PM.


Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.