Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Parts For Sale (http://www.337skymaster.com/messages/forumdisplay.php?f=3)
-   -   two 337 dismantle and sell the parts. (http://www.337skymaster.com/messages/showthread.php?t=4607)

jfafonseca 01-15-20 02:36 PM

two 337 dismantle and sell the parts.
 
I bought two 337 to put in order to fly, but due some personal problems I decided to dismantle and sell the parts.
1- Is a 337G year 1973 Serial Number º 1522 TTSN 2872 h, equipped whit long rang Tanks 150 US Gal all available with electrical parts. Robert stoll equiped, available also with electrical parts, wings and everything, only the engines front and rear and front propeller, Powerpack, main landing gear actuator sold.
2- Is a 337G year 1975 Serial Number º 1645 TTSN 1589 h, equiped whit long rang Tanks 150 US Gal all available with electrical parts, Robert stoll equipped, available also with electrical parts, wings and everything, only the front engine, Powerpack, main landing gear actuator sold. Front propeller and Rear on de box of wood, other parts of propellers front and rear dismantled.
If you need same parts ask me on the email and I´ll send the pic and sell at the reduce price, thank you.
There are many items, I also have a Cargo Pode available some small repairs that I will make here.

Regards
JFAFonseca

MSGP 01-20-20 12:15 PM

Boom Tail Part
 
Looking for rib part #1431024-1
Rib from tail boom

jfafonseca 01-22-20 08:59 PM

Hi MSGP
 
Hello
Yes I have four Rib part #1431024-1 available the amount would be 150 US send you the pic.
If you’re interested, I can see the transport.

Thank you Regards

JFAFonseca

DanChad 11-05-22 03:54 AM

Radome for 337
 
Do you know where I might find a Wing Mounted Radome for a P337H? Dan at Dchad777@mac.com

Cglencross 11-14-22 05:16 PM

Looking for a rear spinner bulkhead that will fit an NA 337E.

Can you help here?

Chris

TomM 11-15-22 10:12 AM

Spinner bulkhead
 
You might find it hard to get a serviceable bulkhead and when you do, they are fairly expensive. There are 2 alternatives for you:

1. K and K welding in Wisconsin does bulkhead repair work. I had them repair mine (rear) and it turned out perfect. Price was 1/3 of a used one in questionable condition. Mine had a lot of cracks, but was not missing any pieces.

2. McFarlane has a replacement unit for just south of $3000

Good luck!


All times are GMT -4. The time now is 03:28 PM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.