Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Messages (http://www.337skymaster.com/messages/forumdisplay.php?f=1)
-   -   Where to go to repair 400A Autopilot? (http://www.337skymaster.com/messages/showthread.php?t=877)

Rickskymaster 11-09-03 07:32 PM

Where to go to repair 400A Autopilot?
 
I need a shop on the East Coast, hopefully in the Mid-Atlantic that specializes on the Cessna 400A Autopilot.

Thanks in advance.

Rick Galvin
N48AT

Ed Coffman 11-09-03 08:06 PM

Rick,

Its not on the east coast but I take my planes to Autopilots Central in Tulsa, OK. Its a round trip airline ticket and two flying days but you only have to do it once. They do good work. Its not cheap. But neither is taking your plane back to the shop several times cause they didn't do it right the first time.

Ed Coffman
________
Macintosh Games

Ernie Martin 11-09-03 10:02 PM

Rick:

Good place somewhere in Florida, but I forget where it is (I think Tampa). Howewver, Tulsa may be closer to you. Also, I'm told that the overwhelming number of problems with the Cessna autopilots are due to old/leaking capacitors, so changing these may be worth a try.

BTW, lived in the DC area for 20 years, including Gaithersburg.

Ernie

Jim Rainer 11-10-03 10:00 AM

400A
 
If you are a member of Cessna Pilots Assn, they will reccomend a place for you to go. I think there is a good shop at Lunken in CIN.

Dale Campbell 10-23-12 08:07 PM

400a Autopilot
 
I am looking for a good place to get my 400a autopilot also repaired, some where near Penna. The last time I had a problem I sent all my parts to Auto Pilot Central. I was told it was repaired. Each time my avionics shop put it back in, it still did not work. They sent it back a total of 6 times,taking 6 months total. Each time they charged me again. When they finally got it going, it cost me over $8000.00. Had I known that in the beginning I would have purchased a S-Tec. Now it is failing again. I need a closer and cheaper shop. Dale

hharney 10-24-12 08:53 AM

I don't think Auto Pilots Central will work on Cessna ARC units anymore. At lease when I talked to them about a year ago they told me they do not work on them anymore. My suggestion would be to call Muncie Aviation in Muncie, IN or Maday Avionics in Grand Rapids, MI. There are no guarantees but at least these shops have experience with the units.

Cheers

Dale Campbell 10-24-12 09:43 AM

Auto Pilot
 
Thank you Herb,
We all missed you a lot at the last fly in at Mistic Harbor. Dale

hharney 10-26-12 11:50 AM

I hoping to be there but stuff happens. Sounds like it was a great success and I am looking forward to future gatherings.


All times are GMT -4. The time now is 04:53 AM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.