Photo Window for our G or H Model
 

I am looking to add a photo window to our unpressurized 337G Model in the rear or middle windows. Is there any information on how to go about doing this with regards to getting it done with FAA approval. I would like to know if anyone has done this with either a standard 337 from or used a DER. Thanks, Kevin

There is an approved mod for a "bubble" window that sticks out about 6-8". I've seen 337's with them installed.

There's also a mod for windows that have a removable square center section so you can shoot through the hole.

But read this old thread, I think covers most options: http://www.337skymaster.com/messages...ead.php?t=4093

Thanks for the information and the link to the old post. I have reached out to the French G model owner that received his information from Edward Coffman. Ed is no longer on the forum, and I have not received any reply from the French G model owner "Alex ALBATROS". Hopefully someone will point me in the right direction. I am looking for specific information for the windows that hinge open, slide open, or are removable. -Kevin