Skymaster Forum

Skymaster Forum (http://www.337skymaster.com/messages/index.php)
-   Messages (http://www.337skymaster.com/messages/forumdisplay.php?f=1)
-   -   Gear swing height (http://www.337skymaster.com/messages/showthread.php?t=5184)

Cap.jensen 06-04-22 07:57 PM

Gear swing height
 
Hi im in the process of fabricating jacks to do gear swing but have not been able to find what hight i need to elevate to clear ground
I se that one manufacturer have a travel of 25 inches
I have some Hydraulik pistons with @ 18 inch travel i was hoping to use
Anyone have a minimum lift number
Best wishes from Denmark

Dan schultz 06-05-22 11:20 AM

I have a set of Alpha 868HLW the rams travel 25 inches according to their website. The website also shows 868 model number for 337, however I believe it’s Ram is about 18 inches.

Dan
N67S

Rick Erwin 06-05-22 12:37 PM

In the Service Manual for my G model, it calls for thirty-three (33) inches of clearance between the belly and the hangar floor for a gear swing.

Rick

Cap.jensen 06-06-22 05:32 AM

Perfect thanks
 
Well thats perfect
Thanks gentlemen


All times are GMT -4. The time now is 06:57 AM.

Powered by vBulletin® Version 3.6.9
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.