PDA

View Full Version : Riley Air conditioning Drive Pulley


Lucerne
08-05-12, 12:00 PM
Hi Everyone,

I am on the hunt for a Riley Air conditioning Compressor drive pulley. There is no part number on the pulley itself but I have been quoted part number RAC33715. This number may or may not be correct.

Does anyone know where I would be most likely to source this pulley? I currently have Owen Bell on the case but we are yet to find the correct pulley.

Thanks in advance,

Rohan.

basloane
07-19-16, 01:47 PM
Hi Lucerne

I just saw your message ( after all these years.... ).

If you have been unable to find a pulley, you can try Tim Kasper at Kasper Industries in Gaylord Michigan.

He took over all the STCs a few years ago and he provided a pulley to me in 2011.

His email address is Tim Kasper <tkasper@kasperind.com>.

You may also wish to have a look at your engine mounts. My pulley was damaged when the ( old ) mounts became compressed enough to cause the pressurization relief cable to wear on the belt, and eventually the pulley.

Hope this helps.

Best Regards,........ Barry Sloane